RHINO Wave Pump TWP200
  • RHINO Wave Pump TWP200

RHINO Wave Pump TWP200

공유
구매혜택
할인 : 적립 마일리지 :
소비자 가격
181,000원
공급 가격
회원전용
상품재고
70개
배송비
4,000원
조건별배송
지역별추가배송비
방문 수령지 : 경기도 파주시 월롱면 다래울길 99 A동
상품코드
1000004915
자체상품코드
TWP200
모델명
B-01-2/5-A-3
브랜드
원아쿠아
제조사
원아쿠아
원산지
중국

상품상세정보

The Flawless Rhino Wave Pump
"Industry-first 24-month free after-sales service warranty"
■ Ultra-quiet sine wave technology.
■ Compact, highly durable construction.
■ Adjustable wave frequency with 5 wave settings.
■ Energy efficient with low heat output.
■ 2-year warranty
■ For both freshwater and saltwater.

The Rhino Wave Pump is a high-performance pump with its own dedicated controller, built to meet every user need.

This flow motor uses ultra-quiet sine wave technology for near-silent operation. Its compact design and top-quality materials make it highly durable, and it offers good value compared with competing products.

It offers five wave settings, runs cool, and consumes little power.

It can be used in both saltwater and freshwater, and comes with a 2-year quality warranty.

Dimensions (mm)
TWP 200: A 83.0, B 89.0, C 10.3
TWP 100: A 66.5, B 84.0, C 10.3
TWP 60: A 55.0, B 60.0, C 8.0

Features:
Ultra-quiet sine wave technology
Compact and durable construction
Adjustable wave frequency with 5 preset modes
Energy efficient with low heat output and low power consumption
2-year limited warranty

Flow Modes: Constant
A steady, strong flow. You can set the flow intensity to suit your tank.

Stream Wave
This mode creates smooth, undulating waves at a constant flow speed.

Random
This mode generates waves at random.

Pulsing (heartbeat-type flow)
This mode keeps the water circulating while it generates waves. You can set the on and off pulse values separately to suit your tank.

Cycle (rotating flow)
This mode rotates the water inside the tank.

Specifications
Max tank glass thickness: 10mm (TWP 60) / 12mm (TWP 100) / 19mm (TWP 200)
Flow rate: 4 tons per hour (TWP 60) / 6 tons per hour (TWP 100) / 18 tons per hour (TWP 200)
Recommended tank size: 45~60cm / 60~120cm / 120~150cm
Power consumption: 8W (TWP 60) / 10W (TWP 100) / 30W (TWP 200)
What's Included: power supply, wet-side motor, controller, external magnet, instruction manual

Model: TWP 60 | TWP 100 | TWP 200
Max tank thickness: 10mm | 12mm | 19mm
Suitable tank: 45~60cm | 60~100cm | 120~150cm
Power consumption: 8W | 10W | 30W
Voltage: DC 24V
Size: 55 x 60 x 60mm | 84 x 66.5 x 66.5mm | 89 x 83 x 83mm

The new One Aqua Rhino TWP series wave pumps offer multi-angle adjustment and pre-programmed pulsing patterns.

Product Features
■ Ultra-quiet sine wave technology
■ Small but powerful design
■ Adjustable wave frequency, 5 preset modes
■ High-efficiency power saving, low heat output, 2-year quality warranty
■ For both freshwater and saltwater

Installation
■ The control box has built-in pump protection. Before use, first connect the 3-pin cable to the pump, then connect the DC plug to the AC adapter wire.

■ Before installing the pump, wipe clean the tank wall where the pump will be placed.

■ At the desired spot, place the pump's inner magnet and the outer magnet on opposite sides of the glass so that they attach to each other. Take care not to pinch your fingers when attaching the outer magnet.

Functions:
1. Pulsing Mode: Press the mode switch so that the motor runs up to its maximum speed. After reaching top speed, it gradually slows back down to minimum speed, and this pattern repeats continuously. The length of the wave is adjusted with the knob: the higher the frequency, the shorter and more distinct the waves become. The wave size can be adjusted with the Speed key.

2. Constant Flow Mode: Press the mode-switch button and the pump delivers a constant flow at the intensity you set. The power level can be adjusted with the Speed key.

3. Stream Mode: Press the mode-switch button and the pump starts slowly, reaches maximum speed, then slows down. The ramp-up and ramp-down times are almost equal. The time can be adjusted with the knob, and the top speed with the Speed key.

4. Random Mode: Press the mode-switch button and the pump produces pulses at randomly varying rates and with randomly varying intensity, up to the maximum.

5. Cycle Mode: Press the mode-switch button and the pump automatically alternates through the last 4 modes, moving on to the next mode every 10 cycles and repeating.

6. Linkage Mode: Power on both wave makers and their controllers, press the mode-switch button, then press the Lock/Linkage key and designate this pump as the master; the screen shows "Master control". Repeat the same steps on the other controller and press its key until the screen shows "Slave". In this mode the two pumps create waves alternately. The wavelength can be adjusted from the master controller, and the speed can be adjusted separately. Note: this function works only when both pumps are switched to Linkage Mode.

6. Linkage Mode: available on the TWP100 and TWP200 only (not available on the TWP60).

Mode Descriptions:
1. Feed Mode: Press and hold the Feed Speed button and the pump stops for 20 minutes, then automatically resumes the wave you had set. Feed your fish during this time.

2. Night Mode: Press and hold the Night Mode button. When the light is dim, Night Mode starts and the pump runs at minimum flow. Night Mode ends when the light becomes bright, or when you press and hold the key.

3. Lock Mode: Press and hold the "Lock/Linkage" button. The knob then has no function, which prevents the wave from being changed by pressing the knob by mistake. To exit Lock Mode, press and hold "Lock".

Protection Features:
1. Water Shortage Protection: If the water level drops and the pump is exposed above the surface, it switches to minimum speed, alternates between running and stopping, and then stops. In this case, add water.

2. Lock-Rotor Protection: If the impeller is blocked or there is debris inside, the pump automatically starts a protection program. It also self-tests every 30 seconds until it has been cleaned.

3. Over/Low Voltage Protection: If the power adapter voltage is below 9V or above 38V, the pump stops and automatically enters its protection program. It tests every 30 seconds until the voltage returns to normal.

4. Phase-Loss Protection: If one or more groups of the motor's three-phase winding coils become disconnected, the pump stops and enters its protection program. It tests every 30 seconds until the three-phase winding is reconnected to the circuit board.

Important
If the controller is powered on but not connected to the pump (or the connection between pump and controller is lost), the controller starts its protection program and the LED flashes "LOCK". To resume operation, disconnect power from the control box, connect it to the pump, then reconnect power.

Care and Maintenance
■ Clean the pump regularly to keep it running efficiently.
■ If there is moisture on the controller, wipe it off so it does not get inside.
■ If the pump suddenly stops, first check the adapter. Then remove the pump's support legs, turn the pump lid counterclockwise to open it, and clean the inside.
■ Do not let the controller or adapter fall into water; it can cause failure.

Maintenance Tips
Carefully detach the pump's magnet base, take it apart, and set it aside. Pull off the impeller caps at both ends of the pump (following the arrow direction in the components illustration).
Separate the parts in this order: flow cage, shaft sleeves, soft rubbers, rotor (in the order of the arrows in the illustration). Clean these parts carefully.

Caution
■ Keep the controller and adapter away from water.
■ Do not open or disassemble the controller or adapter yourself.

1. Equipment name / model: Rhino DC Pump / RHINO 4000

2. Certification number: R-R-Kyi-RHINO4000

3. Derived models: RHINO1500, 2000, 6000, 12000, 20000, 25000, 30000

4. Company name: Comeyong International

5. Date of manufacture: marked separately

6. Manufacturer / country of origin: QINGDAO MANCE AQUA TECHNOLOGY CO.,LTD / China


f0bb775fa2f5c431de14389467b3c86c_102555.jpg


배송안내

- 배송비 : 기본배송료는 4,000원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)  350,000원 이상 구매시 무료배송입니다.

- 본 상품의 평균 배송일은 2일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]

- 본 상품의 배송 가능일은 2일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)

교환 및 반품안내

- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.

- 저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)

- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.

- 제품의 경우, 제품 및 본 상품의 박스 훼손, 분실 등으로 인한 상품 가치 훼손 시 교환 및 반품이 불가능 하오니, 양해 바랍니다. 

- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오. 

환불안내

- 상품 청약철회 가능기간은 상품 수령일로 부터 5일 이내 입니다.

AS안내

- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.

- A/S는 판매자에게 문의하시기 바랍니다.

이미지 확대보기RHINO Wave Pump TWP200

RHINO Wave Pump TWP200
  • RHINO Wave Pump TWP200
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

스크롤 좌측 배너
스크롤 우측 배너
상단으로 이동